07-29
High Intensity Discharge stands for HID, it used high pressure xenon to replace the factory tungsten wire, providing high pressure current to active the xenon by a ballast to light up the bulb and discharging. The HID projector used convex lenses to spot light beam.
07-29
When retrofit HID headlight bulb into the factory housing, the factory reflector can not spot light beam effectively and the light can not focus, due to the changes of light source. HID headlight bulb with high color temperature is easy to be dazzling and too bright. Adding a bi-xenon projector when upgrade a HID, it can improve the performance of spoting light beam, improve the width and distance of light beam and the visibility.
07-29
Retro process includes open the assemble, fix the projector, test the light, wiring, close and seal the assemble. Open and seal the assemble, fix the projector are the key parts in retrofitting. Fixing the projector in the right position influences the light beam and cufoff line condition. It will cause moisture build up inside the headlights if the assemble did not sealed well.
07-29
HID has different color temperature: 4300K、5000K、6000K、8000K、12000K. The color change in the order of white light with a little of yellow, white, white light with a little of blue, blue and purple. The higher color temperature is, the lower lumen is and the worse penetration is. The factory HID is 4300K, it has a better penetration in the rainy day and foggy day, but it is not better than 6000K in visibility. 6000k HID with a white light with a little of blue, it does not have a a better penetration in the rainy day and foggy day as 4300K. It is suggest that 4300K and 5000K for HID color temperature is the suitable choice.
07-29
The High/Low Beam shifter work in a simple process. it used a solenoid to control the shield up or down to distribute high beam and low beam. So it is not easy to be broken down with a long lifespan.
07-29
In generally, as long as the shroud is clear without any patterns, the space of the housing can contain a projector, that the housing can retrofit with HID.
07-29
Retrofit to a HID projector can not increase the brightness, the brightness is lower than a HID bulb. The most function of retrofitting bi-xenon projector is to improve the width and evenness of light beam to achieve a beautiful cutoff.
07-29
Angel Eye is used as a side marker light and a decoration. Yellow, blue, purple, white, red and other colors can be selected according to personal preference.
07-29
The HID modification must install with projectors to avoid dazzling oncoming traffic. A headlight housing without projector, do not recommend to retrofit into HID. The factory halogen reflector can not spot light beam and the light can not focus. Modifying HID must retrofit with a projector.
07-29
The moment when turn on the HID light, there will be a prolong, as it is not a bi-xenon projector headlight. The high beam change into HID, it is impossible to flash the light as a signal light function, that will not only appear a delay condition as well as damage the ballast.
07-29
Because the factory halogen bulb is not too bright, it is not easy to cause the light can not focus. The reflector is designed for the focal length of halogen bulb, when install with a HID flashlight, the light will not focus naturally.
07-29
The factory HID housing looks bright but not dazzling, there is a lens to focus light. A automotive housing with a projector, it can see a clear cutoff line on the wall, which is to prevent dazzling oncoming traffic.
07-29
High brightness, good visibility and multi-color temperature for choose.
